Water Softeners- Non electric Meter Controlled Water Softener (EM8-ECO)

Non electric = no complicated programming
Adjustable hardness setting not factory set to a hardness range
10-minute regeneration (dependant on hardness and water pressure)
300gr of salt used per regeneration
16 litres of water used per regeneration
Valves can be fitted left or right handed or to the rear.
Can perform multiple regenerations every day
Softens the water throughout the whole property.
The latest breakthrough in water softener technology!

Our non-electric meter control machine measures the amount of water that you use and performs regeneration as soon as it reaches its full capacity. Because you tell the machine exactly how hard your water is it knows exactly how much softened water it can produce before it cleans itself. Most non-electric softeners work on a hardness range and are not as accurate as this machine often wasting salt and water.

Our machine only takes 10 minutes to regenerate using 300gr of salt and 16 litres of water. Because this is such a short time period it quickly treats any hard water that may enter the property during this process.

Our machine can perform more than on regeneration per day meaning it does not have to allow a days supply before regenerating. It simply regenerates when it needs to.

Our machine is designed to be easily fitted in your property!

Most softeners are made to a specific design some have connections to the left others to the right and some to rear of the machine.

The EM8-ECO is designed so that the connections simply twist round, therefore you decide on the most convenient position for your plumbing. Our machine is made from a high impact material
Dimensions Height 483mm
Width 241mm
Depth 461mm
Allow 80mm for valves
Connection 3/4 inch
Working Pressure 1-6 bar
Capacity @ 200ppm 750 litres
Salt used per regen 300gr
Water used per regen 16 - 20 litres