Five stage Reverse Osmosis water filter system with pump
The ultimate in water filtration. Membrane will remove micro plastics.
Crystal clear pure refreshing water on tap
This pumped version of the Standard 5 Stage Reverse Osmosis system is suitable for use with low pressure systems. The pump takes up no extra space but does require a power supply. The pump runs from a pressure switch so does not run all the time. Membrane filters produce better filtration results at high pressure. This pumped unit allows the water to pass through the membrane at higher pressure, the advantage being not only a purer quality water but also a faster refil rate of the tank.
Using a five stage water filtration system the EMWC Reverse Osmosis delivers unrivalled quality in water filtration.
1st Stage water filter
5 micron Polypropylene filter (life Span 6 months Approx)
Removes all particles above 5 micron from the water supply this includes metals and general water sediment.
Carbon water filter (life Span 6 months Approx)
Removes, Herbicides, Pesticides, Trihalomethanes, Chlorine, Organic Chemcals, lead and aluminium.
1 Micron Polypropylene water filter (life Span 6 months Approx)
Removes all particles above 1 micron from the water supply this includes any remaining water sediment.
50gpd Membrane (life Span 18 months Approx) This membrane will remove micro plastics from water. The membrane creates the finest filtration, the treated water is forced through the membrane and any un-pure water is discarded this is generally around 75 – 80% allowing through just pure filtered water to enter the pressurised holding tank.
In Line Activated Carbon water Filter (life Span 6 months Approx)
The final stage of filtration, Once the faucet is opened the water goes through a final carbon water filter that effectively polishes the water prior to your consumption. Creating the purest water that you are ever likely to taste.
Easy DIY install no plumbing experience required 12 month manufacturers warranty comes
complete with 15 litre pressurised tank (at 7 psi)
The metal used to manufacture the tank is "cold rolled steel in coil")
With internal Medical grade bladder for Water storage
Booster pump Specifications
Open flow rate 0.1317 GPM / 1.2 LPM
Max outlet pressure 125PSI / 8.62Bar
Operating pressure 20-80PSI
Requires Incoming water pressure between 2.2 - 2.5 bar
gross volume 15ltr approx nett 9ltr
Add a Spare pack of 6 Month filters for €30.00 when you order this RO System
(use the Product Options to add to your order)
Replacement filter packs for this RO
For a better tasting option why not add a mineral filter to your order
For Pure Water 0 TDS reading why not add a De ionization Filter To your order
This unit is designed for use on municipal water supplies if you intend using on alternative water sources, please contact our sales department prior to placing your order
The Waste Kit shown in the fitting Video is supplied as an optional extra and is not a standard item, please choose this from the Product Option