aquaeuro Customer Login
Credit cards accepted PayPal
European Order Helpline: 0044 (0)116 276 3334
Domestic Products
Commercial Products
Featured
RO 5 Stage Pumped Reverse Osmosis with Pressure Gauge(RO5PG) out of stock
Featured Product
Pumped 5 Stage RO with Pressure Gauge 214.96

Featured
Iron & Manganese removal
Featured Product
Whole Treatment Systems - Bespoke Design

Featured
3.9 lpm Ultra Violet and sediment system With Tap (UV3.9WL5M)


Featured
AquaCal 10 Industrial Limescale remover
Featured Product
Industrial Electronic Lime removal 499.96

Featured
400 L/hr Industrial RO System
Featured Product
400 ltr per hour RO System 75% Recovery rate

SPECIAL OFFER!
Softeners - Harvey's Homewater Twin Tank Non Electric Water

Non Electric Twin Tank Water Softener

Meter Controlled Softener.
This Machine will only perform a regeneration based upon your water consumption, making it far more efficient than most other machines.

Once installed and set up our water softener automatically performs a regeneration and supplies the entire property with softened limescale free water. It has the added benefit of being able to use either Block or Tablet salt

WHY THIS IS THE ONE TO BUY?
The Twin Tank Softener differs in a number of ways from the traditional single tank units. The most obvious difference is the two tanks.
So why are two tanks better than one?
Single tank softeners can not supply soft water whilst performing a regeneration program. All softeners need to perform regeneration as they all have a limited amount of water that they can soften. Regeneration effectively cleanses the resin to allow it to continue to produce soft water. A single tank machine will perform this action normally in the early hours of the morning. The disadvantage of this is you have the possibility of the softener doing this either before it has used up its full capacity or worse still running out if you suddenly use more water than the machine thinks you will ( sometimes you dont know when extra guests turn up so you cant expect a machine to.)
Because the Twin tank has Two tanks it can regenerate at any time of day or night as only one tank at a time is in service. When it has reached its capacity it performs a regeneration whilst the other tank continues to supply you with soft water.

GUARANTEE
All EMWC Water Softeners have a 5-year guarantee -at no extra cost! Because of its proven reliability, your EMWC water softener will have a five-year parts and one year labour guarantee. This, alongside our proven track record for producing highly reliable equipment, has established us as one of the UK's most popular water softener companies.

MADE IN ENGLAND
The water softener is manufactured in the UK and is therefore designed specifically for the UK market. And for our domestic water system it also means that we, unlike other companies, "wet test” the softeners before they leave the factory. So you can rest assured that the water softener firstly works but more importantly it doesn't leak.

ECONOMIC AND EFFICIENT
An EMWC Water Softener is very efficient in water use. It uses over 50% less water than a conventional water softener during regeneration.

Solvent free - food grade resin.
There's something very special about an EMWC Water Softener, something that is unique and gives both incomparable performance and specification. The secret is in the resin that determines the quality of your soft water. All EMWC Water Softeners incorporate a resin that has been specially purified for household use. It is both food grade and free from chlorinated solvents (Solvent Free). Not all manufacturers can offer you this level of specification. So whether you bath in it, shower in it, wash your hair in it, your clothes, or simply brush your teeth with it, the water from your EMWC water Softener will not only be lovely and soft, but solvent free.

COMBINATION BOILERS AND PRESSURISED SYSTEMS
With more and more heating systems using either a combination boiler or a pressurised system, the need for a water softener with the available flow rate is of paramount importance. All of our water softeners have an unrivalled flow rate of up to 50 lpm, making them ideal for even the most demanding system.

INSTALLATION
Installing your softener - plumber or DIY? Every softener comes complete with fitting instructions,Hardness test Kit, Waste & Overflow hoses and an option of a Full installation kit, allowing for installation by a plumber or DIY enthusiast.

Technical
Valve- Meter Controlled

Connections
Inlet/Outlet 3/4" Bsp male parralel
Overflow 1/2" Hose connector
Drain 3/8" O.D tubing

Operating Parameters

Max operating Pressure 8 bar (116 p.s.i )
Min Dynamic Operating Pressure 1 bar (14.5 p.s.i )
Max water temperature 30 degree C
Min water temperature Protect from freezing
BSI approved for use with aluminium heat exchange systems
Volume & Weight

Softener Resin volume 2x 4.3 litres
Resin Vessel Dimensions 140mm Diameter x 400mm high
Salt Storage capacity 15K tablet salt

Dimensions

Depth 440mm  - 17 inch
Height 485mm - 19 inch
Width 250mm
  - 10 inch 


Please allow 20mm for the elbow connections on the side of the softener
Operating Data

Upto 508 Ltr Capacity per tank at 250ppm hardness
350 grammes Salt used per regeneration
65% Salt efficiency
50 litres / min peak flow at 2 bar pressure drop
30 litres / min Rated service flow at 1 bar pressure drop 
17 litres Water used per Regeneration
1.9 1/ min Maximum flow rate to drain
11 Minutes Maximum Regeneration Time
< 1mg per litre Softened water hardness
(if you live in an area above 400ppm please select the 500 model
Installation Kits
Pressurised Systems (Mega Flo) = 22mm Kit
Combination Boilers = Combi Kit
Standard Fittings (most Homes = 15 mm Kit

Please select Fitting Kit if Required From the Check Out

  
Quantity:
  
Price:
€999.95
 
 
 
Aqua Euro © 2017