aquaeuro Customer Login
Credit cards accepted PayPal
European Order Helpline: 0044 (0)116 276 3334
Domestic Products
Commercial Products
RO 5 Stage Pumped Reverse Osmosis with Pressure Gauge(RO5PG) out of stock
Featured Product
Pumped 5 Stage RO with Pressure Gauge 214.96

Iron & Manganese removal
Featured Product
Whole Treatment Systems - Bespoke Design

3.9 lpm Ultra Violet and sediment system With Tap (UV3.9WL5M)

AquaCal 10 Industrial Limescale remover
Featured Product
Industrial Electronic Lime removal 499.96

400 L/hr Industrial RO System
Featured Product
400 ltr per hour RO System 75% Recovery rate

De Ionisation 10 inch filter insert

When added to a RO system can produce 99.99% pure water with 0 TDS reading

The De-ionization filter takes the full size RO to a higher level of filtration. It is an excellent inline filter insert, especially for those who live in areas with exceptionally high levels of TOTAL DISSOLVED SOLIDS (TDS) in their tap water.
The post de-ionizer takes the small percentage of contaminants that the membrane could not remove and filters this to greater than 99.99% pure water.
It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.ohm 
DI (de-mineralize) resin filter: Produce 99.99% pure water by simply attaching this convenient deionization filter with RO unit.
Convenient post RO filtration DI unit (RO/DI unit) provides crucial supplemental filtration to remove most impurities for pure polished product water. Excellent in areas with hard water. Produce 99.99% pure water. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm.
Technical Specifications:
Diameter: 2.5"
Length: 10"
pressure: 4bar
Capacity: 500 gallons (2000 liters)
Approx 6 Months
Fits standard 10" Housing not supplied with insert

* Postage & Package of £6.00 & 2% Administration & bank charges included in the price

Aqua Euro © 2017