Commercial Water Softener Clack Simplex 50 Service Flow 2000 litres per hour (1054)

Our commercial Simplex Water softener range are the ideal solution for applications that require consistent water flow

Simplex softeners use high quality vessels and superior softening resin. The unit is controlled with a multi-port valve on top of the vessel allowing automatic regeneration at a given time or after a metered quantity of water is used. A separate brine tank is included which sits next to the vessel.
The simplex 50
Has a 50 litre resin tank capable of producing 8,300 litres of water.

Specification

1 x 50 litre resin tanks
Control valve

Clack Meter control

Service flow
Peak 2000 litres per hour
Max 2000 litres per hour
Min 200 Litres Per Hour

Capacity @ 300 ppm CaCO3
8,300 litres per tank

Salt usage per regeneration 6 KG

Inlet/outlet connection 3/4 inch Male BSP
Drain connection 3/4 inch hose elbow
operating pressure 20-120 psi
water temperature range 2 - 38 degrees Celcius

Dimensions Tank

Height 1661mm
Diameter 305mm

Brine Tank x1

Volume 105 ltr
Height 850 mm
Diameter 550mm

Peak flow rate based on 40 bed volumes per hour
Higher flow rates may result in some residual hardness.
Salt dosage based on 150 gram per litre using C100E resin.
Capacity based on a conservative 50 gram CaCO3 removal per litre of resin.

Most units are supplied unassembled