aquaeuro Customer Login
Credit cards accepted PayPal
European Order Helpline: 0044 (0)116 276 3334
Domestic Products
Commercial Products
Featured
3.9 lpm Ultra Violet and sediment system With Tap (UV3.9WL5M)


Featured
AquaCal 10 Industrial Limescale remover
Featured Product
Industrial Electronic Lime removal 499.96

Featured
400 L/hr Industrial RO System
Featured Product
400 ltr per hour RO System 75% Recovery rate

Featured
RO 5 Stage Pumped Reverse Osmosis with Pressure Gauge(RO5PG)
Featured Product
Pumped 5 Stage RO with Pressure Gauge 214.96

Featured
Iron & Manganese removal
Featured Product
Whole Treatment Systems - Bespoke Design

RO DE Ionization Filter (RO-DE I)

When added to a RO system can produce 99.99% pure water with 0 TDS reading Can be retro fitted to any RO system that uses 1/4" Tubing or pre fitted to our 5 Stage Reverse Osmosis system The De-ionization filter takes the full size RO to a higher level of filtration. It is an excellent inline filter, especially for those who live in areas with exceptionally high levels of TOTAL DISSOLVED SOLIDS (TDS) in their tap water. The post de-ionizer takes the small percentage of contaminants that the membrane could not remove and filters this to greater than 99.99% pure water. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.ohm Clear inline housing + DI (de-mineralize) resin filter: Produce 99.99% pure water by simply attaching this convenient deionization filter with RO unit. Convenient post RO filtration DI unit (RO/DI unit) provides crucial supplemental filtration to remove most impurities for pure polished product water. Excellent in areas with hard water. Produce 99.99% pure water. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm. Technical Specifications: Diameter: 53mm Length: 254mm Max. flow rate: 200 l/24h Max. pressure: 4bar Capacity: 500 gallons (2000 liters) Approx 6 Months In clear inline housing

Options:
 
  
Quantity:
  
Price:
€54.50
 
 
 
Aqua Euro © 2017